Alumina Powder are useful in lapping to achieve good mirror finish on Iron and Steel materials.
Packaging Size : 500gms
Grade : 1 or A (Micron size 0.014).
Color : white
Material : Lavigated Alumina Paste
Pack Size : 500 Gram
Application : Final Specimen Polishing
Packaging Type :
Product Description :
Polishing is the most important step in preparing a specimen for micro structural analysis.
Polishing cloths are used along with an abrasive to remove layers of surface deformation and expose the material structure for analysis.
Use this cloth with diamond pastes or alumina
Product Description :
Polishing Fluid is useful in lapping to achieve good mirror finish on Iron and Steel materials.
Packaging Size: 300 ml
Specially formulated lubricant spray enables uniform dispersion of the compound
Low volatility to minimize dry lapping
Aerosol spray ensures minimum
Product Description :
This polishing paper is used for smoothing surfaces.
9" x 11" full size
Flexible A-weight paper backing
Super precision polishing, Anti-Curl Design, Made in Japan
Exceptionally high-quality waterproof paper with high sanding performance
Ideal for sanding metals, woods,
Product Description :
Trinocular Metallurgical Microscope RXM-7T with Co-axial Focusing
Body : Trinocular Head inclined at 45-degrees.
Nosepiece : Quadruple revolving nosepiece with accurate centering and positive click stops
Focusing : Co-axial coarse & fine focusing knobs
Stage : Large Low
The Poldi Hardness Tester is suitable for measuring the Brinell Hardness of Steel, Cast iron, Brass Aluminum, Copper etc.
PRINCIPLE:
Load is applied by a hammer blow on the specimen and a standard test bar in linear direction through a hardened steel ball of 10 mm dia. The impact load on
Product Description :
Hot air ovens are sturdy double walled units
Inner chamber : S.S.
Outer wall : Mild Steel with Powder coating
The gap between the walls fitted with glass wool insulation to avoid heat loss.
Heating elements are made of high-grade Nichrome wire.
Equipped with thermostat to
Product Description :
Construction : Double walled
Inner and Outer : Made of 304 grade stainless steel With chamber drain nozzle at bottom.
Temperature Control : Microprocessor Based PID Controller
Insulation : Gap between inner and outer chamber is filled with glass wool insulation.
Temperature
Product Description :
Take a PVC / metal die measuring 1½ " x 32 mm and flat surface table/sheet measuring 150 x 150mm
Apply grease to the ID of the tube and to the surface table sheet
Mix the solution A and powder B proportionately
Before it dries, place the specimen on the surface and center
This round Centrifuge machine is widely used in pathological laboratories & hospitals for routine centrifuge test. These are fitted with resiliently mounted motor for vibration free performance & having built-in 5 steps speed regulator.
Maximum Speed: 3500 RPM
Maximum RCF : 1600g
Capacity: 4 x15
Product Description :
Magnification 20x
Reticle scale length 7.00 mm.
Least Count 0.01mm.
Field of View 6.00 mm.
Highest Quality Optics
Easy-To-Read Reticule
Metallic body
LED Light
Easy To
Product Description :
Compact, Light Weight, Table Top with easy operations. 250mm diameter screen with 90° cross line and chart holders. Screen Graduated to 360° with vernier reading 6 minutes.
Projection Light Source with 24v / 150w Halogen Lamp. Double Oblige LED Light Source for Surface
Ideal for various industrial inspection applications. These are designed for precision and comfort at the same time these are Ergonomic, Energy efficient and Economical.
Lens : Dia 150 mm made from fine optical glass
Effective Lens Dia.: 135mm
Magnification : 3.5X
Body Material : Aluminum
Body
Metallographic Specimen Cutting machine can be used to cut various metal or non-metal specimens (select different cutting disc according to different materials) so as to observe the metallographic and llithofacis structure. The machine features high performance, low noise & high finish of specimen
Product Description :
Diamond Lapping Paste are useful in lapping to achieve good mirror finish.
Usage : Commercial, Laboratory, Domestic, Industrial
Material : Diamond Paste
Packaging Size : 5 Gram In One Syringe
Reliable
Shore A hardness tester is used for testing the hardness of rubber, printer roller, vulcanized rubber, elastomeric, thermoplastic, plastic fleur,fibers,resins etc.
Hardness Type : Shore A Basic Model
Range : 0-100 HA
Recommended Testing Range : 10-90 HA
Accuracy : ± 1 HA
Indenters are made of
Digital Thermometer Monitors indoor/ outdoor temperature (℉/℃) & humidity
FEATURES :
Temperature Range : -10Deg.C to +50Deg.C;
Humidity Range : 10% to 99%RH
Resolution for temperature : 0.1deg.c;
Resolution for humidity : 1%rh
Accuracy for Temperature : +/-1Deg.C;
Accuracy Humidity :
Metallographic specimen mounting press is suitable for the thermo hardening pressing the small metallographic specimen which is not idiomorphic or hard to take. After Forming, it will be very easy to process the grinding, polishing of the specimen and it is also convenient to process measuring of
